Error code
Monogram oven error code F350
Monogram oven error code F350: An issue with the upper cooling fan circuit, or an obstruction in the cooling fan. Which machines can actually raise it, where the number lives on this make, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code F350, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
F350
An issue with the upper cooling fan circuit, or an obstruction in the cooling fan. Built-in ovens depend on that fan to keep the surrounding cabinetry and their own electronics within temperature, so this is not a code to run the oven through.
or call (305) 614-3572
What it narrows down to
the upper cooling fan circuit or an obstruction
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the wall ovens
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
the oven went over temperature
the oven temperature sensor circuit is open
the oven temperature sensor circuit is shorted
the temperature probe or its socket has failed
The same digits mean different things on different equipment. Search the full code list
In more detail
About Monogram oven error code F350
What F350 means, in the maker's own words
An issue with the upper cooling fan circuit, or an obstruction in the cooling fan. Built-in ovens depend on that fan to keep the surrounding cabinetry and their own electronics within temperature, so this is not a code to run the oven through.
Where this code actually appears
On the control panel, and usually with a sound. Monogram describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.
Which machines this one applies to
Monogram professional ranges and wall ovens. Monogram says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.
What to do about it
- Listen for the cooling fan after the oven has been on for a while. Silence where there should be air moving is the picture that goes with this.
- Look for an obstruction. On a built-in installation that can be something as ordinary as a cloth or a packet left on top of the appliance during a remodel.
- If the fan is clear and not running, the fan or its circuit is measured.
- Do not keep using the oven while this stands. The cabinetry around a built-in oven relies on that airflow.
Where this goes next
The job this usually becomes is diagnostic visit, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 614-3572 and describe what the display is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards