Error code
Monogram Advantium 240 V error code F2
Monogram Advantium 240 V error code F2: A shorted thermal sensor on the 240 V Advantium — the other side of F1's circuit. There are two Advantium ovens and they are different appliances. Which machines can actually raise it, where the number lives on this make, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code F2, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
F2
A shorted thermal sensor on the 240 V Advantium — the other side of F1's circuit. There are two Advantium ovens and they are different appliances. The model number decides which table applies, and reading one against the other's table is the most common way these are misdiagnosed.
or call (305) 614-3572
What it narrows down to
a shorted thermal sensor
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the wall ovens
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
the oven went over temperature
the oven temperature sensor circuit is open
the oven temperature sensor circuit is shorted
the temperature probe or its socket has failed
The same digits mean different things on different equipment. Search the full code list
In more detail
About Monogram Advantium 240 V error code F2
What F2 means, in the maker's own words
A shorted thermal sensor on the 240 V Advantium — the other side of F1's circuit. There are two Advantium ovens and they are different appliances. The model number decides which table applies, and reading one against the other's table is the most common way these are misdiagnosed.
Where this code actually appears
On the control panel, and usually with a sound. Monogram describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.
Which machines this one applies to
Monogram Advantium 240 V speed ovens. Monogram says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.
What to do about it
- Reset at the breaker for a minute; one attempt.
- Sensor and harness measured against specification.
- Connectors inspected, because coastal air gets into them.
- This is a service call rather than an owner fix.
Where this goes next
The job this usually becomes is oven element replacement, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 614-3572 and describe what the display is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards