Error code
Monogram refrigerator: tF on the display is TurboFreeze running, not an error
Monogram — an indicator rather than a code. Not an error. This is the TurboFreeze indicator — the freezer equivalent of TurboCool, shown while the feature is active.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code tF, from the manufacturer's own documentation
This code has no number, because this equipment has no display to put one on. The appliance signals it instead — an alarm, a symbol or a pattern of lights — and what it means is recorded in the documentation that ships with it.
The code
tF
Not an error. This is the TurboFreeze indicator — the freezer equivalent of TurboCool, shown while the feature is active. It can read as EF or an upside-down F with an F on some displays.
or call (305) 614-3572
What it narrows down to
TurboFreeze is running
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the refrigerators
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
the freezer is warming and the food is at risk
the power was interrupted
the ice maker is not operating
demonstration mode — cooling is off on purpose
the defrost system has not run in 24 hours
the temperature is not what it was set to
TurboCool is running
The same digits mean different things on different equipment. Search the full code list
In more detail
About Monogram refrigerator: tF on the display is TurboFreeze running, not an error
What the appliance is actually doing
Not an error. This is the TurboFreeze indicator — the freezer equivalent of TurboCool, shown while the feature is active. It can read as EF or an upside-down F with an F on some displays.
Which machines this one applies to
Monogram refrigeration with electronic dispenser controls. Monogram says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.
What to do about it
- Nothing. It ends by itself.
- If the cabinet is also not holding temperature, that is a separate matter and this code is not evidence for it.
Where this goes next
The job this usually becomes is diagnostic visit, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 614-3572 and describe what the display is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards