--- title: "Dishwasher leaking" description: "Monogram dishwasher leaking — on a fully integrated dishwasher a leak is invisible until the cabinetry has taken it, and in these kitchens the flooring and…" url: "https://monogrammiami.support/symptoms/dishwasher-leaking/" date_modified: "2026-09-02" Appliance type: "Dishwashers" --- # Monogram dishwasher leaking ### Stop using it and find out where it is coming from Do not keep running it to see if it does it again. Put paper down in front of and under the machine if you can reach, run a short cycle and watch. Water at the front points at the door and the seal; water at the back or a damp cabinet base points at a hose or a connection, and that is the version doing damage you cannot see. ### What it usually means, by the kind of Monogram appliance Monogram sells one appliance in several forms, and the same behavior points at different things on each of them. A built-in side-by-side and an integrated column are not the same service situation, and a dual-fuel range and an induction range fail in different halves. - **Machines with Floor Protect** — They detect it themselves and cancel the cycle, showing LEAK DETECTED or 999. That is the appliance protecting your floor and it should be taken at its word. - **Panel-ready doors** — The heavy panel and the springs that carry it. A door that drops seals unevenly along the bottom edge and leaks slowly, which is the version that does the most damage. - **Older installations** — Hoses, clamps and the connection to the disposal, all of which age in a warm cabinet. ### Why this is the one to call about early Every other complaint on this site costs food, electricity or patience. A leak under an integrated dishwasher costs cabinetry and flooring, and it does it silently. The machines with Floor Protect cancel the cycle and tell you outright, and that message deserves to be taken seriously rather than reset away. A door that has dropped Sealing unevenly along the bottom edge. The commonest cause on panel-ready machines. The door gasket Hardened or displaced. A hose or a clamp Age, heat and vibration. Slow, and at the back where nothing is visible. The disposal connection A clamp that has loosened, or a hose that has hardened at the fitting. A float that has stuck, which is what C4 reports. The pump seal Reached last, and it means the machine comes out. Stop using it Genuinely. Every cycle adds to what the cabinet is absorbing. Look for LEAK DETECTED or 999 On the top edge of the door. Put paper down Front and, if you can reach, underneath. Check whether the door falls open A door that will not hold its position is the usual cause on a panel-ready machine. Water where a fully integrated machine hides it What it usually means A dropped door seals unevenly along the bottom LEAK DETECTED means the machine canceled on purpose This is the one not to leave Stop using it and find out where it is coming from Do not keep running it to see if it does it again. Put paper down in front of and under the machine if you can reach, run a short cycle and watch. Water at the front points at the door and the seal; water at the back or a damp cabinet base points at a hose or a connection, and that is the version doing damage you cannot see. What it usually means, by the kind of Monogram appliance Monogram sells one appliance in several forms, and the same behavior points at different things on each of them. A built-in side-by-side and an integrated column are not the same service situation, and a dual-fuel range and an induction range fail in different halves. Machines with Floor Protect — They detect it themselves and cancel the cycle, showing LEAK DETECTED or 999. That is the appliance protecting your floor and it should be taken at its word. Panel-ready doors — The heavy panel and the springs that carry it. A door that drops seals unevenly along the bottom edge and leaks slowly, which is the version that does the most damage. Older installations — Hoses, clamps and the connection to the disposal, all of which age in a warm cabinet. Why this is the one to call about early Every other complaint on this site costs food, electricity or patience. A leak under an integrated dishwasher costs cabinetry and flooring, and it does it silently. The machines with Floor Protect cancel the cycle and tell you outright, and that message deserves to be taken seriously rather than reset away. ### It shows LEAK DETECTED but I cannot see any water. Believe the machine. The sensor is in the base tray, which is exactly where you cannot see, and it is there because that is where a leak arrives first. ### Can I reset it and finish the load? You can, and we would not. If it is a genuine leak the load is the least of what it will cost you. --- **[Read full article: Dishwasher leaking](https://monogrammiami.support/symptoms/dishwasher-leaking/)**