---
title: "Monogram oven error code F2 or F20"
description: "Monogram oven error code F2 or F20: Shown as F2 or F20. Which machines can actually raise it, where the number lives on this make, and what to do next."
url: "https://monogrammiami.support/error-codes/oven-f2/"
date_modified: "2026-09-02"
Appliance type: "Professional ranges, Wall ovens"
---


# Monogram oven error code F2 or F20

### What F2 or F20 means, in the maker’s own words

Shown as F2 or F20. On this platform it is the oven going over the temperature it was asked for — a genuine event rather than a communication problem, and one worth taking seriously on an appliance that runs a self-clean cycle.

### Where this code actually appears

On the control panel, and usually with a sound. Monogram describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.

### Which machines this one applies to

Monogram professional ranges and wall ovens. Monogram says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.

### What to do about it

- Stop using the oven until it has been looked at. An oven that cannot control its own temperature is not a convenience problem.
- Note whether it happened during normal cooking or during self-clean — the second is much more common and points at how hard that cycle works everything.
- The temperature sensor and its wiring are measured first, then the control.
- On a double oven, note which cavity. They have separate sensors.

### Where this goes next

The job this usually becomes is [oven element replacement](/services/oven-element-replacement/), and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 614-3572](tel:+13056143572) and describe what the display is doing before booking anything.

Monogram professional ranges and wall ovens

What this one means

What F2 or F20 means, in the maker’s own words

Shown as F2 or F20. On this platform it is the oven going over the temperature it was asked for — a genuine event rather than a communication problem, and one worth taking seriously on an appliance that runs a self-clean cycle.

Where this code actually appears

On the control panel, and usually with a sound. Monogram describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.

Which machines this one applies to

Monogram professional ranges and wall ovens. Monogram says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.

What to do about it

Stop using the oven until it has been looked at. An oven that cannot control its own temperature is not a convenience problem.

Note whether it happened during normal cooking or during self-clean — the second is much more common and points at how hard that cycle works everything.

The temperature sensor and its wiring are measured first, then the control.

On a double oven, note which cavity. They have separate sensors.

Where this goes next

The job this usually becomes is oven element replacement, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 614-3572](tel:+13056143572) and describe what the display is doing before booking anything.

---

**[Read full article: Monogram oven error code F2 or F20](https://monogrammiami.support/error-codes/oven-f2/)**