---
title: "Monogram microwave error code F4"
description: "Monogram microwave error code F4: An open humidity sensor. Sensor-driven cooking programs depend on it, so the practical symptom is that automatic modes stop…"
url: "https://monogrammiami.support/error-codes/microwave-f4/"
date_modified: "2026-09-02"
Appliance type: "Microwaves"
---


# Monogram microwave error code F4

### What F4 means, in the maker’s own words

An open humidity sensor. Sensor-driven cooking programs depend on it, so the practical symptom is that automatic modes stop behaving while manual cooking is fine.

### Where this code actually appears

On the control panel, and usually with a sound. Monogram describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.

### Which machines this one applies to

Monogram built-in microwaves and microwave drawers. Monogram says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.

### What to do about it

- Try a manual time-and-power program. If that works normally, the humidity sensor is confirmed as the area.
- Check that the vent path in the cavity is not obstructed.
- The sensor and its wiring are measured.

### Where this goes next

The job this usually becomes is [diagnostic visit](/services/diagnostic-visit/), and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 614-3572](tel:+13056143572) and describe what the display is doing before booking anything.

Monogram built-in microwaves and microwave drawers

What this one means

What F4 means, in the maker’s own words

An open humidity sensor. Sensor-driven cooking programs depend on it, so the practical symptom is that automatic modes stop behaving while manual cooking is fine.

Where this code actually appears

On the control panel, and usually with a sound. Monogram describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.

Which machines this one applies to

Monogram built-in microwaves and microwave drawers. Monogram says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.

What to do about it

Try a manual time-and-power program. If that works normally, the humidity sensor is confirmed as the area.

Check that the vent path in the cavity is not obstructed.

The sensor and its wiring are measured.

Where this goes next

The job this usually becomes is diagnostic visit, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 614-3572](tel:+13056143572) and describe what the display is doing before booking anything.

---

**[Read full article: Monogram microwave error code F4](https://monogrammiami.support/error-codes/microwave-f4/)**