---
title: "Monogram dishwasher error code C2"
description: "Monogram dishwasher error code C2: The total pump-out cycle has exceeded seven minutes."
url: "https://monogrammiami.support/error-codes/dishwasher-c2/"
date_modified: "2026-09-02"
Appliance type: "Dishwashers"
---


# Monogram dishwasher error code C2

### What C2 means, in the maker’s own words

The total pump-out cycle has exceeded seven minutes. The same family as C1 and further along it: the machine has spent an unreasonable amount of its cycle trying to get water out. On a fully integrated machine this is displayed on the TOP EDGE of the door, which is only visible when the door is open. Most owners have never seen it.

### Where this code actually appears

On the control panel, and usually with a sound. Monogram describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.

### Which machines this one applies to

Monogram fully integrated dishwashers. Monogram says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.

### What to do about it

- Press RESET to stop the beeping — that is the manufacturer’s instruction for the noise, not for the cause.
- Work the same list as C1: air gap, drain hose and its high loop, disposer and knockout plug.
- Take the filter out of the floor of the tub and clean it. It unscrews by hand and most owners have never removed it.
- If the path is clear and the time is still long, the pump is losing performance and is measured.

### Where this goes next

The job this usually becomes is [dishwasher drain repair](/services/dishwasher-drain-repair/), and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 614-3572](tel:+13056143572) and describe what the display is doing before booking anything.

Monogram fully integrated dishwashers

What this one means

What C2 means, in the maker’s own words

The total pump-out cycle has exceeded seven minutes. The same family as C1 and further along it: the machine has spent an unreasonable amount of its cycle trying to get water out. On a fully integrated machine this is displayed on the TOP EDGE of the door, which is only visible when the door is open. Most owners have never seen it.

Where this code actually appears

On the control panel, and usually with a sound. Monogram describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.

Which machines this one applies to

Monogram fully integrated dishwashers. Monogram says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.

What to do about it

Press RESET to stop the beeping — that is the manufacturer’s instruction for the noise, not for the cause.

Work the same list as C1: air gap, drain hose and its high loop, disposer and knockout plug.

Take the filter out of the floor of the tub and clean it. It unscrews by hand and most owners have never removed it.

If the path is clear and the time is still long, the pump is losing performance and is measured.

Where this goes next

The job this usually becomes is dishwasher drain repair, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 614-3572](tel:+13056143572) and describe what the display is doing before booking anything.

---

**[Read full article: Monogram dishwasher error code C2](https://monogrammiami.support/error-codes/dishwasher-c2/)**