---
title: "Monogram Advantium 240 V error code F2"
description: "Monogram Advantium 240 V error code F2: A shorted thermal sensor on the 240 V Advantium — the other side of F1's circuit."
url: "https://monogrammiami.support/error-codes/advantium-240v-f2/"
date_modified: "2026-09-02"
Appliance type: "Microwaves, Wall ovens"
---


# Monogram Advantium 240 V error code F2

### What F2 means, in the maker’s own words

A shorted thermal sensor on the 240 V Advantium — the other side of F1’s circuit. There are two Advantium ovens and they are different appliances. The model number decides which table applies, and reading one against the other’s table is the most common way these are misdiagnosed.

### Where this code actually appears

On the control panel, and usually with a sound. Monogram describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.

### Which machines this one applies to

Monogram Advantium 240 V speed ovens. Monogram says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.

### What to do about it

- Reset at the breaker for a minute; one attempt.
- Sensor and harness measured against specification.
- Connectors inspected, because coastal air gets into them.
- This is a service call rather than an owner fix.

### Where this goes next

The job this usually becomes is [oven element replacement](/services/oven-element-replacement/), and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 614-3572](tel:+13056143572) and describe what the display is doing before booking anything.

Monogram Advantium 240 V speed ovens

What this one means

What F2 means, in the maker’s own words

A shorted thermal sensor on the 240 V Advantium — the other side of F1’s circuit. There are two Advantium ovens and they are different appliances. The model number decides which table applies, and reading one against the other’s table is the most common way these are misdiagnosed.

Where this code actually appears

On the control panel, and usually with a sound. Monogram describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.

Which machines this one applies to

Monogram Advantium 240 V speed ovens. Monogram says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.

What to do about it

Reset at the breaker for a minute; one attempt.

Sensor and harness measured against specification.

Connectors inspected, because coastal air gets into them.

This is a service call rather than an owner fix.

Where this goes next

The job this usually becomes is oven element replacement, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 614-3572](tel:+13056143572) and describe what the display is doing before booking anything.

---

**[Read full article: Monogram Advantium 240 V error code F2](https://monogrammiami.support/error-codes/advantium-240v-f2/)**